Routine maintenance is crucial to ensure that your vehicle is always in perfect running condition. If you stick to the factory-prescribed Mazda maintenance schedule, your vehicle will also be more reliable, safe on the road, and fuel-efficient. Best of all, it will save you money on unexpected and expensive repairs.
Oil and Filter Changes
The oil in your Mazda ensures that the components are well lubricated and running smoothly. Change the oil and filter every 7,500 miles or six months, whichever comes first, for optimal vehicle performance. If you drive your vehicle under special driving conditions, such as on dusty or muddy roads, towing heavy loads, or in heavy traffic, we recommend an oil and filter change every 3,000 miles.
Consult your owner’s manual or speak to your Mazda technician for the precise oil and filter changes for your specific model and driving conditions.
The Flexible Oil Change Monitor Setting
Replace the oil when the wrench indicator is on. Replace the air filter and cabin air filter at the same time. The maximum interval is every 10,000 miles or 12 months, whichever comes first.
The Fixed Oil Change Monitor Setting
Replace the oil and filter every 7,500 miles or six months. Replace the air filter at 30 months and the cabin air filter every two years.
Routine Maintenance
The following services are general guidelines to assist you with your maintenance schedule if you drive your vehicle under normal driving conditions. Check your owner’s manual for the precise intervals for your Mazda model.
7,500 Miles or Six Months
- Oil and filter change
- Tire rotation
15,000 Miles or 12 Months
- Engine oil and filter replacement
- Brake system inspection
- Lubricate locks and hinges
- Tire rotation
22,500 Miles or 18 Months
- Engine oil and filter replacement
- Lubricate locks and hinges
- Cabin air filter replacement
- Tire rotation
30,000 Miles or 24 Months
- Engine oil and filter replacement
- Fuel line and hoses inspection
- Brake system inspection
- Steering operation and linkages inspection
- Front and rear suspension inspection
- Inspect ball joints
- Inspect wheel bearing axial play
- Inspect driveshaft dust boots
- Tighten bolts and nuts on chassis and body
- Lubricate locks and hinges
- Tire rotation
37,500 Miles or 30 Months
- Oil and filter change
- Drive belts inspection
- Air filter replacement
- Lubricate locks and hinges
- Tire rotation
45,500 Miles or 36 Months
- Oil and filter change
- Brake system inspection
- Lubricate locks and hinges
- Exhaust system and heat shields inspection
- Tire rotation
52,500 Miles or 42 Months
- Oil and filter change
- Lubricate locks and hinges
- Tire rotation
60,000 Miles or 48 Months
- Oil and filter change
- Inspect fuel lines and hoses
- Inspect hoses and tubes for emissions
- Brake system inspection
- Steering operation and linkages inspection
- Front and rear suspension inspection
- Ball joints inspection
- Wheel bearing axial play inspection
- Inspect driveshaft dust boots
- Tighten bolts and nuts on chassis and body
- Lubricate locks and hinges
- Tire rotation
75,000 Miles or 54 Months
- Oil and filter change
- Audible inspection of engine valve clearance and adjustment
- Spark plugs replacement
- Tire rotation
120,000 Miles or 10 Years
The engine coolant must be replaced at 120,000 miles and then every 60,000 miles or five years after that.
Routine maintenance, performed by qualified technicians, is the key to keeping your Mazda performing at its best. Visit Rochester Mazda today and our factory-trained technicians will ensure that your vehicle is in excellent running condition.
Connect with us
